Snake Plant Leaves Curling | Causes and Solutions

Snake Plant Leaves Curling is a common problem you may have when growing plants, and this article will guide you through the process of gradually eliminating the problem. Now you are wondering what to do, but before you do that you must identify the cause of your problem.

If the leaf curls up on the snake plant, then you may be in your underwear, and you may even be a snake rolling on the snake itself.

Insect infestation and disease are also responsible for this problem, but in this article I will explain possible causes and solutions that will help you revive your favorite plants and snakes.

Causes of Snake Plant Leaves Curling And Solutions

It is extremely important to determine the exact reason and then take the necessary steps to correct the problem, otherwise you may not achieve the desired result. Here are some tips on how to solve this problem with a few simple steps and a quick video tutorial on the subject.

Under watering

Without water, the roots of snake plants cannot absorb the essential nutrients from the soil and there is a high risk of damage to the root system and the plant’s viability. When underwater, the snake plant can perform normal physiological functions, but without water it cannot perform its normal functions.

Even without water, the essential components cannot be transferred to the leaves, and the nutrients that remain in the water in soluble form are obtained by bees.

The result is that in severe cases the leaves of the snake plant become wrinkled and a common symptom, such as underwear, is the brown tips of the snake plants.

The snake heads do not need much water to relax in this beautiful home and watering every 2 – 4 weeks is sufficient to cover the moisture requirement.

If the soil is hard, loosen it with a little water and water regularly, and after a few days the leaves of the snake plants are unfolded. Make sure you do not water excessively, otherwise you will make the situation worse and cause more problems.


If they are yellow, the rustling of the leaves is also a sign of overflowing snake plants, and flooding can be fatal for them. If you water them, they will be affected by root rot, and sometimes it is impossible to save the plant.

This rot is caused by a fungal disease, and due to root rot, the root system eventually becomes dysfunctional.

The leaves of the snake plant curl up and water and nutrients can be absorbed by the leaves, which can let the root system rot.

If you suspect a problem with the watering, you must immediately check the root system of the plant. Remove the whole plant from the pot and wash the root systems to get rid of the soil and remove the leaves.

Now check the roots carefully and if they have root rot, you will get a bad smell of “root rot.” Disinfect with charcoal powder, cut off the infected part of the root, rinse with water and disinfect again.

If root rot is severe, plant the plant in fresh new soil and use a new container to avoid further contamination. If you save the plants from dying, you can reproduce them in the same container and if the roots rot, they reproduce.

Lack of Light

The light inside is sufficient for snake plants to thrive, but if you don’t get the minimum amount of light, symptoms such as rippling leaves will occur.

Like other plants, snake plants need light to continue the photosynthesis process, but they are known to be essential for the plant’s food preparation.

Without food, the leaves of the snake plant show symptoms of ripples and cannot thrive, and without food, their leaves cannot thrive. Place the snakes somewhere else where they have access to the light needed for photosynthesis, such as a tree house or a tree house.

If your home does not receive natural light, you can use an artificial light source to cover the light needs. The snake head can easily use this artificial light source for photosynthesis and it cannot harm the plants of the snake.

Improper Fertilizer Application

Snakeheads do not need frequent fertilizer, but during the growing season in summer it is sufficient to apply fertilizer to cover the nutrient requirements.

Excessive fertilizer use damages the root system and leaves, and snakeheads cannot handle the additional nutrients. Snakeheads show signs of burnt or curled leaves and other symptoms of overfertilization as well as damage to the roots.

If possible, you may consider using organic fertilizer, as it is released slowly, but ensure a continuous fertilizer supply. However, due to the high nitrogen content of organic fertilisers and the limited amount of water in the soil, there is no risk of overfertilisation.

Always adhere to the recommended dose, which is found on the fertilizer packaging and can cause problems with leaf pruning in some cases.

Temperature Stress

At higher temperatures, the transpiration process accelerates and the leaves of snake plants curl up, which can cause problems with the leaf pruning on the snake plant.

The plants lose more water than normal, and as a result, the loss of water causes the snake leaves to curl up.

Indoor snake plant leaves curling up.

On the other hand, low temperatures can also have the same consequences for snake plants: at low temperatures, the water in the leaves freezes and forms crystals.

This causes permanent damage to the leaves of the snake plant, and if you live in an area where temperatures are extreme, you need to make sure your snake plants stay at home in the shade.

Place your plants where the temperature is low and place them in the shade of trees, shrubs, shrubs or other trees in your garden or in a shady place.

Make sure they stay warm in a room and you can revive them with attractive leaves, but not too hot or too cold, just enough.

Incorrect pH

The pH value of the soil determines the availability of nutrients in the soil. Magnesium (Mg) will only be available at a pH of 5.5 to 7.5, which is roughly the average pH of other soils in your area.

These leaves cannot produce chlorophyll, which is essential for photosynthesis, and therefore low and older leaves show symptoms such as yellowing and rippling.

If you find a problem, you need to check the pH of the soil and if it is too low or too acidic, it can be very easy to add a damp layer of lime to your soil. If your pH is higher than recommended, add some lemon juice to the water before watering and increase it again, which is much easier if you add hydrated lime to the soil.

Ultimately, this will help to lower the pH and cause less damage to the plants and more growth in the coming months.

Rootbound Snake Plant

It is obligatory to change the pot size according to the age of the snake plant, but if it remains the same, the root system will expand and form roots. In some containers the roots form a circular net, in others an oval net around the container.

You will then have to decide on the size and age of the snake plant if it needs repotting. One possible cause of the curling of snake plants is the fact that they are rooted. The root system does not have enough space, which limits the function and absorption of nutrients. This will help the root systems expand and thrive again, but not in the same way as a normal plant.

Root Rot

Excessive watering and stagnant water in containers can accelerate fungal infections, and damp, moist conditions inhibit the ability of bacteria and fungi to consume oxygen and create a suffocating environment.

These conditions are ideal for the growth of fungal diseases and can be fatal for snake plants. Root rot makes the root system inoperable and the roots are not able to provide the plant with the essentials.

So you also need to check the roots to see if you see symptoms such as rippling leaves and you will see when it is too late to save the plant. Root rot is easy to follow in the early stages, as it shows no visible symptoms, but you can see the symptoms rolling from the ground into the leaves.

Transplant Shock

If you have recently transplanted a snake plant, it usually takes time for the root system to adapt to the new environment. Transplanting to a new pot is a common care for indoor plants, but can cause a lot of stress for the plant.

During this transition period, the snake plant may not be able to absorb enough nutrients to maintain its normal physiological functions. Curling up the leaves is a visible symptom of transplant shock, but can also cause damage to the root system.

After a few days, the snake plant forgets to take advantage of the changing environment, i.e. to keep as much as possible in partial shade during the transition phase.

It is better to use nutritious, well-drained soil before planting the snake plant. Avoid using old soil, as it may be exhausted and will provide the plan with nutrients, but avoid using it if possible.

Snake Plant Leaves Curling Due to Insect Infestation

Why do the leaves of the snake plant curl up at the end of its leaves and not the other way round, as in a snake?

The cause of the snake plant’s leaves curling up can be a combination of factors, such as the presence of insects, insects sucking the sap from the leaves, or even a lack of sunlight.

Neem Oil is a natural insect – it fights insect repellent and insecticide against snake plants. Remove pests from the snake plant and leave them on a cloth soaked in alcohol for at least 30 minutes before leaving the smoke.

General Best Practices for Snake Plant

Make sure you have sufficient light and avoid direct sunlight, but artificial light sources are also an effective way to prevent natural light from being available.

Reduce the water frequency in winter, especially during periods of low rainfall, such as the autumn and winter months and the summer months.

Make sure that the soil is drained from excess water through drainage shafts and that stagnant water is drained away. Check out the latest prices on Amazon for nutrients – enriched soil mixtures, fertilizers and other soil products at the best prices.

Keep your snake plant at room temperature.

Occasionally you can mist the leaves of your plants with a damp cloth, but keep insects away and keep them away from the roots of the plant.

A single fertilization every 4 – 6 weeks is sufficient to ensure all the necessary nutrients, but no more than that.

If you suspect that your snake plant is being rooted, you should consider potting it into a larger pot if possible. Please leave a comment below and try to discuss possible causes and solutions for this problem. If you find more information, just let me know And I will be happy to add it to the information.

Don`t copy text!